EOS M50

• The next Generation EOS M digital camera with UHD 4K movie shooting for Vlog (Video-Blog) Production
• 24.1 megapixels Canon APS-C CMOS image sensor
• Equipped with the newly developed powerful DIGIC 8 digital imaging processor that delivers a host of new image functions
• Standard ISO range is 100-25600 and expandable to ISO 51200 (H)
• Adopts the next generation CR3 RAW format and new C-RAW compact format with file size approx. 40% smaller than normal RAW
• Equipped with a 3-inch 1.04M-dot side-opening Vari-angle LCD touch monitor
• Built-in 0.39-inch 2.36M-dot OLED Electronic Viewfinder (EVF)
• Supports UHD 4K video shooting⁴ (120Mbps bit-rate) and “4K Frame Grab” function⁶
• Supports HD 100p/119.9p “High Frame Rate” movie⁵
• 4K and Full HD Time-lapse movie function⁷
• Improved “Dual Pixel CMOS AF” with max. 38% expansion in AF area⁹ (approx. 100% Vertical x 88% Horizontal) and max. 192% increase⁹ in number of AF points (max. 143 points)
• New Eye Detection AF¹¹ detects and focuses on subject’s eye for portrait photo with precise focus
• Max. 10FPS high-speed continuous shooting and Max. 7.4FPS continuous shooting with SERVO AF
• New Silent Mode² is added for complete silent shooting without shutter sound
• Dual Sensing IS is added for the first time with approx. 0.5-stop¹ boost to image stabilization effect for still image shooting by utilizing shake information from image sensor in additional to lens gyro sensors’ shake information
• Built-in Wi-Fi for remote shooting and image transfer to smartphones. NFC is also equipped for fast smartphone connection.
• Built-in with Bluetooth® low energy technology for easy wake-up of camera, GPS information acquisition and remote control from smartphones
• New “Transfer Images to smartphones when shooting” function
• New “Automatic sending images to computer” function
• Supports the “Feature Assistant” graphical user Interface
• Supports HDMI HDR output of RAW image playback on HDR compatible TV¹⁶ for a wider dynamic range display

¹ With the following compatible lenses: EF-M 15-45mm f/3.5-6.3 IS STM, EF-M 55-200mm f/4.5-6.3 IS STM and EF-M 18-150mm f/3.5-6.3 IS STM (As of 26 Feb 2018). Firmware update of the lenses is required. 
² Flash photography, continuous shooting and noise reduction during long exposure are not available in Silent Mode 
³ Lens data for lenses launch after EOS M50 can be registered to the camera with EOS Utility 
⁴ Contrast detection AF will be used when shooing at 4K format. 4K shooting takes place by cropping pixels from the center of the image sensor 
⁵ AF is fixed when recoding starts. Maximum recording time is 7 min 29 sec 
⁶ Frame Grab from Full HD/HD movies is not possible. As movie frames are saved as still images, image quality is not equivalent to normal still images. Aspect ratio is 16:9. 
⁷ Maximum 900 exposures, maximum 30 second (NTSC) or 36 second (PAL) timelapse movie can be shot. The minimum settable shutter speed is 1/30 sec. (for NTSC) or 1/25 sec. (for PAL). 
⁸ Supported Lens: EF-M 18-150mm f/3.5-6.3 IS STM and EF-M 15-45mm f/3.5-6.3 IS STM (As of 26 Feb 2018, Firmware update maybe required) 
⁹ With compatible lenses only. Details: https://hk.canon/zh_HK/consumer/web/eos-m50-daf-area-compatibility
¹⁰ Automatically activate when the following lenses are attached: EF-M 11-22mm f/4-5.6 IS STM, EF-M 15-45mm f/3.5-6.3 IS STM, EF-M 22mm f/2 STM (As of 26 Feb 2018) and all EF/EF-S lenses (except TS-E lenses and MP-E lenses) 
¹¹ Eye Detection AF operates during One-shot and Face+Tracking AF only. It is not available during Servo AF and movie shooting. 
¹² Both the camera and computer must be connected to the same Wi-Fi network. Pairing of the camera and the software is required for the first time. When sending images automatically, the camera must be turned on, and the computer must also be turned on and logged in. To automatically transfer new/non-transferred images only, proper setting is necessary. 
¹³ Pairing of the camera and smart device are required for the first time. In some cases, an iOS smart device may require operation from the device side. Both camera and smart device have to be within a certain distance when the Camera Connect App is active. In remote shooting and Image viewing mode, it will switch from Bluetooth to Wi-Fi connection. For Android, Android 5.0 (or later) and Bluetooth 4.0 (or later) are required. For iOS, Bluetooth 4.0 (or later) is required (iPhone 4s or later, iPad 3rd generation or later, iPod touch 5th generation or later). Some devices that fulfill the mentioned requirements may not be able to connect via Bluetooth, however Image transfer and other remote operations will still be possible through Wi-Fi connectivity. 
¹⁴ Pairing between the camera and a compatible smartphone (or Wireless Remote Controller BR-E1) beforehand are required. Both camera and the compatible smartphone (or BR-E1) have to be within a certain distance. 
¹⁵ The camera and smartphone need to be connected via Bluetooth. While Wi-Fi connection is established, GPS data cannot be renewed 
¹⁶ Requires a HDR compatible TV and HDMI connection. Only RAW images are displayed in HDR. Movie and JPEG playback is possible on HDR compatible TV, but they are not displayed in HDR. 


The Bluetooth^®word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Canon Inc. is under license. Other trademarks and trade names are those of their respective owners.